Two Component Oil-based /Solvent Based Polyurethane Waterproofing Coating

Short Description:

Sinomaco 2 part oil based polyurethane waterproof coating is a reactive curing two component high polymer waterproof coating consisting of A and B part. The part A is a kind of prepolymer prepared by polymerization of polyether resin and diisocyanate; and component B consists of vulcanizing agent, catalyst, resin, etc. Components A and B are mixed in a certain proportion, stirred evenly, coated and scraped on the bottom layer, and an integral and rubber elastic waterproof membrane will be for...


  • Product: Two part Oil based polyurethane waterproofing coating
  • Packing: 10kg/20kg/pail
  • Mixing ratio: A:B = 1:2 /1:3
  • Color : A part white color, B part black color, mixed in black color
  • Product Detail

    Product Tags

    Sinomaco 2 part oil based polyurethane waterproof coating is a reactive curing two component high polymer waterproof coating consisting of A and B part. The part A is a kind of prepolymer prepared by polymerization of polyether resin and diisocyanate; and component B consists of vulcanizing agent, catalyst, resin, etc. Components A and B are mixed in a certain proportion, stirred evenly, coated and scraped on the bottom layer, and an integral and rubber elastic waterproof membrane will be formed after curing reaction.

     

    The A part is a polyurethane prepolymer in white color and the B part is the curing agent in black color. Upon applycation, both A and B components will be mixed according to a certain ratio, normally 1:2. then to be applied on the working surface of the construction buildings, and after reaction, it will cured into a continuous, flexible and seamless rubber waterproof layer in black color through reaction for waterproofing.

    Product Features

    ① The product has stable performance, good weather resistance, high solid content, and reliable waterproof performance;

    ② Strong adhesion, liquid construction, room temperature curing, convenient operation, short construction period;

    ③ Many other places It has excellent elongation and tensile strength.

    ④ Has excellent low temperature resistance.

    Application Scope

    ① Different types of underground waterproofing, waterproofing for basement floor, inner wall, outer wall, nurse wall, tunnel etc.

    ② Roofing system waterproofing, bathroom waterproofing, kitchen waterproofing, balcony waterproofing, iAny sink or tank waterproofing, wall pipe, drainage, etc.

    ③ Many other places;

    Packaging & Storage

    60kg/set(A part 20kg/pail, B part 20kg * 2pails)

    Room temperature storage in 9-12 months

    Reference Dosage

    The amount of 1.0mm thick coating film prepared according to the weight ratio of A: B = 1: 2 is approximately: 1.3 ~ 1.5Kg / m² (if special parts are to be waterproofed, you can add a release fiber cloth or Spinning.)

    Technical Data Sheet

    Item

    Solid content

    ≥ 92.0%

    Surface drying time

    ≤ 12h

    Drying time

    ≤ 24h

    Leveling

    20min time, no obvious tooth marks

    Tensile strength

    2.00 MPa

    6.00MPa

    Elongation at break

    500 %

    450%

    Tear strength

    15~30N / mm

    30~40N / mm

    Low-temperature bendability

    -35 ℃, no cracks

     


  • Previous:
  • Next: